Show Interfaces Ge - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

show interfaces ge-

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
276
show interfaces ge-fpc/pic/port
<brief | detail | extensive | terse>
<media>
<statistics>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display status information about the specified Gigabit Ethernet interface.
NOTE: You must have a transceiver plugged into an SFP or SFP+ port before
information about the interface can be displayed.
—Display standard information about the specified Gigabit Ethernet
ge-fpc/pic/port
interface.
brief | detail | extensive | terse
media —(Optional) Display media-specific information about network interfaces.
—(Optional) Display static interface statistics.
statistics
view
Monitoring Interface Status and Traffic on page 233
Troubleshooting Network Interfaces on EX3200 Switches
Troubleshooting Network Interfaces on EX4200 Switches
Troubleshooting an Aggregated Ethernet Interface on page 329
Junos OS Ethernet Interfaces Configuration Guide
show interfaces ge-0/0/0 on page 283
show interfaces ge-0/0/0 brief on page 283
show interfaces ge-0/0/0 brief (with EEE Enabled on the EEE-capable Base-T copper
Ethernet interfaces) on page 284
show interfaces ge-0/0/0 detail on page 284
show interfaces ge-0/0/4 extensive on page 285
Table 48 on page 277 lists the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Display the specified level of output.
show interfaces ge-
Copyright © 2015, Juniper Networks, Inc.
command. Output