Table 19: Optical interface Support and Copper Interface Support for Gigabit Ethernet SFP
Transceivers in EX3300 Switches
Ethernet Standard
Specification
1000BASE-T
Model number
Rate
Connector type
Fiber count
Transmitter wavelength
Minimum launch power
Maximum launch power
Minimum receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Modal bandwidth
Distance
DOM support
Software required
Support for Virtual Chassis
configuration
Copyright © 2015, Juniper Networks, Inc.
The tables in this topic describe the optical interface support over single-mode fiber-optic
(SMF) and multimode fiber-optic (MMF) cables for SFP and SFP+ transceivers and over
the copper interface for SFP transceivers:
Table 19 on page
31—Optical interface support and copper interface support for Gigabit
Ethernet SFP transceivers.
Table 20 on page
42—Optical interface support for Gigabit Ethernet SFP+ transceivers.
Value
EX-SFP-1GE-T
10/100/1000 Mbps
RJ-45
Copper
–
–
–
–
–
Copper
–
–
100 m (328 ft)
Not available
Junos OS for EX Series switches, Release 12.1 or later
Yes, starting with Junos OS Release 12.3R3
Chapter 3: Component Specifications
31