System board and components
Concluding steps
▶ Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Verify that the iRMC displays voltage sensor information (BATT 3.0 V).
▶ If applicable,
"Installing the front cover with lock" on page
▶ BIOS settings are automatically reloaded. Time and date must be set
manually, see
"Verifying the system time settings" on page
17.4
Trusted Platform Module (TPM)
17.4.1
TPM kit
Figure 333: TPM installation kit
1
TPM
2
TPM spacer
492
79.
59.
65.
71.
3
4
Upgrade and Maintenance Manual
71.
104.
Special screw for TPM
TPM bit insert for TPM special screw
RX2540 M7