Applying The Thermal Paste - Fujitsu PRIMERGY RX1330 M3 Upgrade And Maintenance Manual

Processor (CPU)

11.2.5 Applying the thermal paste

I
For Japan the service engineer must follow the instruction provided
separately.
I
If the CPU upgrade or replacement kit contains a new heat sink, a thin
layer of thermal compound has already been pre-applied to its lower
surface. In this case, please proceed with section
sink" on page
Figure 152: Thermal paste syringe
One thermal compound syringe (FTS-FSP:P304000004) contains thermal
paste for three CPUs.
In order to determine the correct amount of thermal paste (equal to 1.0 gram),
divide the grey area of the syringe up into three equal segments.
I
Add graduation marks to the syringe using a permanent marker to help
you apply the thermal paste.
238
240.
Upgrade and Maintenance Manual
"Installing the heat
RX1330 M3