Setting Emulation Parameter; Setting Font Select Parameter - Xerox 4213 User Manual

XEROX COAX/TWINAX OPTION

Setting emulation parameter

Setting font select parameter

A3-22
D —Press the Select button to continue, if ERROR 1424 is
displayed.
—Wait until the display reads: READY.
H 2. Press the Online button to take the printer off line.
online indicator light is not lit.
A 3. Press and release the Menu button to display the first Main
Menu heading in the top level menu. The display reads:
MAIN MENU
PRINTER LANGUAGE
C 4. Press the Last Page button until the display reads:
MAIN MENU
EMULATION
B 5. Press the Test button to display the available emulation
headings. The display reads:
EMULATION
XES
D 6. Press the Select button to select the XES emulation.
asterisk appears next to your selection.
B 7. Press the Test button to display the available XES emulation
menu options. The display reads:
XES
COPIES 01
If the 4045 Model 20 emulation is not being used, proceed to
the "Setting data encoding parameter" section.
4045 Model 20 emulation is being used, follow the steps given
below to select the default XES font:
C 8. Press the Last Page button until the display reads:
XES
FONT SELECT
*
003
XEROX 4213 LASER PRINTER USER GUIDE
The
An
Otherwise, if the