Saving Your Font Selection As The Default Font - Xerox 4213 User Manual

PRINTING WITH THE 4213

Saving your font selection as the default font

Font characteristics
4-18
Use the Last Page C button to move the cursor to highlight
•
the next position in the number sequence.
When the displayed font number matches the number of the
font you wish to set as the default font, press the Select D
button, then press the Online H button to put the 4213 back
online.
After choosing a new default font as shown above, press the
Online H button to take the printer off line, then immediately
press the Reset G button to display RESET MENU/EMULATION
RESET.
displayed. Now press the Select D button then press the Online
H button to return the printer online.
emulation is saved as the default font, in place each time the
emulation is currently in use.
Fonts are made up of the following eight characteristics:
Orientation Orientation refers to the direction of print on a page. The 4213
can print in either portrait or landscape orientation.
across the width of the page is called portrait orientation.
Printing across the length of the page is called landscape
orientation. This guide is printed in portrait orientation.
Symbol set A symbol set is a unique sub-grouping of all the available
characters in a font. For example, Roman-8 and IBM-PC, ECMA-
94, ISO 25 are the symbol sets available with the LJ2D emulation.
Each symbol set is designed with a specific application in mind.
Note:
control panel font selection returns to the factory default setting.
You must re-select your font using the printing menu.
Font Status sheet to check the font ID number.
Press the Last Page C button until SAVE DEFAULTS
Additionally, if you change to a new symbol set, the
The font selection for the
XEROX 4213 LASER PRINTER USER GUIDE
is
Printing
Print a