Xerox 4213 User Manual page 411

MULTI MEDIA FEEDER
A6–10
5. Press the Test B button to display the lower level emulation
options. The display reads:
XES or LJ2D
COPIES 01
6. Press the Last Page C button until the display reads:
XES or LJ2D
TRAY SEQ MODE
7. Press the Test B button to display the available tray sequence
mode options. The display reads:
TRAY SEQ MODE
TRAY 1*
Note: If the current emulation is LJ2D, TRAY 1-2* is the default
tray sequence.
8. Press the Last Page C
the message display. Possible choices are:
TRAY 1
•
TRAY 2
•
TRAY 1-2
•
MMF
•
9. Press the Select D
source. An asterisk appears next to your selection.
Note: To select the MMF for another emulation:
Press the Menu A
•
emulation menu heading. The display reads:
EMULATION
XES*/(other available emulation)
Press the Last Page C
•
emulation heading.
Follow steps 5 to 9 above to select the MMF as the
•
feed source for this emulation.
button until the MMF is displayed in
button to select the MMF as the feed
button twice to return to the
button to display a new
XEROX 4213 LASER PRINTER USER GUIDE