Coax/Twinax interface kit
XEROX 4213 LASER PRINTER USER GUIDE
A3.
Xerox Coax/Twinax option
To use the Xerox Coax/Twinax option (XCTO) you need to
understand how to perform the following tasks:
Install the interface kit.
•
Select and configure the interface at the control panel so that
•
the 4213 laser printer can communicate with IBM mini and
mainframe computers.
The optional Coax/Twinax (IBM mini/mainframe) printer interface
kit provides a low cost mechanism for attaching the 4213 laser
printer to the IBM environment.
of the following components:
IBM mini/mainframe Printed Wiring Board Assembly (PWBA)
•
Code cartridge which stores the software necessary for
•
converting incoming IBM printer commands to Xerox Escape
Sequences (XES).
required to support the printer emulations.
Optional
Twinax
•
connection of the PWBA to an IBM communications cable.
This interface kit is comprised
The cartridge also contains the fonts
cable
assembly
which
enables
the
A3-1