Parameter Setting - Xerox Phaser 6130 Service Manual

Parameter Setting

Phaser 6130 Color Laser Printer Service Manual
This function reads/writes the parameter values, errors, and life counter
values stored in the printer.
Note
Print the parameter list from
changing the registration value. The parameter list contains the parameter
and life counter values currently stored in the engine.
To access the Parameter list:
1. Turn the printer power Off (if the printer is On).
2. Simultaneously press the Up Arrow and Down Arrow buttons and turn
on the printer.
3. The Service Mode menu is displayed.
4. Press the Up Arrow or Down Arrow button to find Parameter. Press the
OK button.
5. Select the appropriate item to change (i.e.,
OK button.
6. Enter the appropriate range using the Up Arrow or Down Arrow button.
Press the OK button.
7. The new value "# *" is displayed.
Note
"*" = data has been saved
8. Press the Cancel button to return to the
Parameter Setting
Item
Slow Scan K to P -128 to 127 Sets the registration in the paper feeding
Slow Scan 600 Y/M/C
Fast Scan K to M, Y, C -128 to 127 Sets the registration in the scanning
Fast Scan 2 K to M, Y, C
Fast Scan M-Feed, Tray
Life Counter
Service Mode >
Slow Scan
Parameter
Description
Range
direction.
-30 to 30
direction.
-1 to 2
-30 to 30
— Reads the life counter and the printer.
Adjustments and Calibrations
Parameter > Print before
KtoP). Press the
menu.
6-7