Jam Recovery A4-22; Allow Job Reset A4-22 - Xerox 4213 User Manual

POSTSCRIPT EMULATION
A4-22
Jam Recovery
The Jam Recovery menu item controls whether or not pages are
automatically reprinted after a paper jam, or if the pages lost due
to a paper jam must be resent from the host.
ON - Automatic recovery without loss of data
•
OFF - No recovery, pages must be resent
•
The Jam Recovery menu item options are listed below as they
appear in the message display:
JAM RECOVERY
ON* (ON or OFF)
Allow Job Reset
The Allow Job Reset menu item, when on, enables the operator
to reset the job currently being processed.
ALLOW JOB RESET
ON* (ON or OFF)
Asynchronous Control Mode
When the Asynchronous Control Mode is ON, any CNTL C
(cancel) or CNTL T (status) sent to the printer is acted on
immediately. Set this option to OFF when using MCK to switch
to PCL. Many PCL applications contain CNTL C, so a job will be
cancelled if this option is ON.
The Asynchronous Control Mode menu item options are listed
below as they appear in the message display:
ASYNCHRONOUS CONTROL MODE
OFF* (ON or OFF)
Error Handler
The Error Handler menu item option is listed below as it appears
in the message display:
ERROR HANDLER
OFF* (ON or OFF)
XEROX 4213 LASER PRINTER USER GUIDE