Setting The Twinax Option A3-66 - Xerox 4213 User Manual
Hide thumbs
Also See for 4213:
- Programmer's reference manual (246 pages) ,
- User manual (8 pages) ,
- Quick reference card (6 pages)
Table of Contents
Advertisement
XEROX COAX/TWINAX OPTION
A3-66
C
3. Press the Last Page button until the display reads:
MAIN MENU
HOST INTERFACE
B
4. Press the Test button to display the available host interface
headings. The display reads:
HOST INTERFACE
SERIAL*
C
5. Press the Last Page button until the display reads:
HOST INTERFACE
IBM COax/TWINax*
D
6. Press the Select button to select the Twinax option interface.
An asterisk appears next to your selection.
Note: IBM Coax/Twinax must first be selected.
Setting the Twinax option
B
7. Press the Test button to display the IBM Main Menu heading.
The display reads:
IBM MAIN MENU
IBM BUTTONS
C
8. Press the Last Page button until the display reads:
IBM MAIN MENU
IBM COMMS
B
9. Press the Test button. The display reads:
0000
A four-digit access code is required (password is 1776). The
highlighted number represents the first position of the
Twinax password.
10. Use the following buttons to enter the password:
A
Menu increases the displayed number.
•
B
Test decreases the displayed number.
•
C
Last Page moves to the next numeric position in the four
•
digit password.
XEROX 4213 LASER PRINTER USER GUIDE
Advertisement
Chapters
Table of Contents
