Setting The Envelope Size At The Lj2D Submenu - Xerox 4213 User Manual

Setting the envelope size at the LJ2D submenu

Selecting a landscape font for LJ2D
XEROX 4213 LASER PRINTER USER GUIDE
Table 4-5. Envelope size requests
Envelope name
Monarch
Comm 10 (Business)
International DL
International C5
Note: The printing quality on envelopes may not be as good as
when printing on regular paper because envelopes are composed
of multiple layers of paper, and a higher incidence of paper jam
may occur. To determine and isolate problems related to the
printer itself or the variable thickness of the specific envelope, try
printing on a single sheet of paper.
If your application software does not allow you to designate the
envelope size, follow these procedures to select the envelope
size and landscape print orientation at the LJ2D menu.
1. select envelope size.
2. Select landscape orientation.
If you need to select a landscape font, refer to the next section.
3. Send the print job from your host computer to the printer.
Make sure the display reads EMULATION/LJ2D*, and you have
selected landscape as the print orientation.
button to display the emulation choices, then press the Last Page
C button until LJ2D/FONT NUMBER 001 displays.
Select D button before you begin your font number entry.
display now reads LJ2D FONT NUMBER 001.
number represents the first position of the 3-digit number
allowed for font identification. When the number is highlighted,
its value can be changed.
PRINTING WITH THE 4213
Envelope size
99 x 191 mm (3.88" x 7.5")
108 x 241 mm (4.13" x 9.5")
110 x 220 mm (4.33" x 8.66")
162 x 229 mm (6.38" x 9.02")
Press the Test B
The highlighted
Press the
The
4-29