USING THE 4213 MENUS
B. Changing the host interface setting
Press the Online button to take the printer off line.
H
Press the Menu button to access the Main Menu.
A
Press the Last Page button until the display reads HOST INTERFACE.
C
Press the Test button to display the host interface options. The display reads SERIAL.
B
Press the Last Page button until the display reads PARALLEL CENT.
C
Press the Select button to select PARALLEL CENT. An asterisk appears next to your selection.
D
Press the Menu button until OFF LINE appears in the message display.
A
To save parallel Centronics as the default interface:
Press the Reset button to access the Reset Menu.
G
Press the Last Page button until the display reads SAVE DEFAULTS.
C
Press the Select button to select the option.
D
Press the Online button to put the printer back online.
H
interface, in place each time the printer is switched on.
3-16
This example shows you how to change the host interface
setting from serial interface to parallel Centronics.
Parallel Centronics is the default
XEROX 4213 LASER PRINTER USER GUIDE