Maps Of The 4213 Main Menu And The Ibm Main Menus - Xerox 4213 User Manual

XEROX COAX/TWINAX OPTION

Maps of the 4213 Main Menu and the IBM Main Menus

A3-18
The 4213 menus which are accessed from the control panel are:
The Main Menu
•
—I/F Option
The IBM Main Menu
•
—IBM Coax
—IBM Twinax
The following maps are included as an overview of the menus
and to illustrate the different options within each menu. Refer to
"The Main Menu map" section, and figure A3-1 for the "IBM
Main Menu map for Coax".
figure A3-2 for the "IBM Main Menu map for Twinax".
You use the following buttons at the control panel to move
through the different menu levels:
B Use the Test button to move to the next lower menu level.
•
This move is illustrated on the maps by a down arrow.
C Use the Last Page button to move the display to the right to
•
display the menu options/headings at the same level.
This move to the right to headings/options on the same
menu level, is illustrated by listing headings/options across
the map on the same level, horizontally; or, when necessary
due to space limitations, listing them diagonally on the page.
A Use the Menu button to move to the next higher menu
•
level.
This move is in the opposite direction of the down arrow on
the map.
H Use the Online button to exit the menu.
•
Note: When switching into or out of the coax/twinax option,
you may sometimes get one or two pages of nonsense
characters.
For Twinax environment, refer to
XEROX 4213 LASER PRINTER USER GUIDE