INSTALLATION
Install the paper trays
1-18
6.
Switch the printer power on by pressing the power switch
to the on (I) position.
panel
message
(approximately 75 seconds).
Note:
The yellow Warning light is lit and remains lit until
the two paper trays are installed, and paper is loaded, at
least, in the upper paper tray.
1.
Remove the two paper trays from the packages.
Note: Perform steps 2 to 6 for each paper tray.
2.
Flip back the paper tray cover.
Note: Cover cannot be removed from the paper tray.
READY XES appears on the control
display
after
diagnostics
XEROX 4213 LASER PRINTER USER GUIDE
are
run