Start Data Monitor Mode - Xerox 4213 User Manual

XEROX 4213 LASER PRINTER USER GUIDE

Start Data Monitor Mode

Data Monitor is a data analysis tool which diagnoses application
software related problems.
If the data monitor mode is enabled at this menu and you submit
a print job (XES emulation only), the printer automatically prints
the data received prior to any formatting or manipulations
conducted by the printer.
ASCII or EBCDIC representations of each character or function
received by the printer.
on after printing stops, press the Online H button to take the
printer off line and then press the Last Page C button to print the
remaining page of data.
The printout always uses a landscape page with the 16.66 pitch
XCP14iso-L font with the ASCII or EBCDIC symbol set.
control characters from Hex 00 to Hex 20 will print the
abbreviated ASCII or EBCDIC meaning.
printable Hex 20 to FF is undefined, the "Happy Face" character
(Hex 01) from the IBM US symbol set is printed in the ASCII area
of the data monitor printout.
data monitor printout.
D To begin data monitor mode, press the Select button when the
message display reads:
TEST MENU
START DM MODE
Stop Data Monitor Mode
D
To disable data monitor mode, press the Select button when the
message display reads:
TEST MENU
STOP DM MODE
USING THE 4213 MENUS
The printout contains the hex and
If the Last Page indicator light remains
If a character in the
Refer to appendix B for a sample
Any
3-51