Accessing The Main Menu And Selecting Xes - Xerox 4213 User Manual

USING THE 4213 MENUS
3-20
This section shows which buttons on the control panel are used
for accessing the Main Menu, advancing to display the emulation,
and, if applicable, selecting emulation configuration options.
If necessary, refer to "Control panel," in chapter 2, "Overview,"
for a diagram showing the location of the control panel buttons.

Accessing the Main Menu and selecting XES

Use the following buttons at the printer control panel:
H 1. Press the Online button to take the printer off line.
green online indicator light is not lit.)
A 2. Immediately press and release the Menu button to display
the first Main Menu heading in the top level menu.The
display reads:
MAIN MENU
PRINTER LANGUAGE
C 3. Press the Last Page button. The display reads:
MAIN MENU
EMULATION
B 4. Press the Test button. The display reads:
EMULATION
XES*
C D 5. If XES is not the currently selected emulation, first press the
Last Page button until XES is displayed; then, press the Select
button to select it.
selection.
Selecting the XES emulation configuration options
6. After selecting XES as the current emulation, use the
following buttons on the control panel to move through the
different menu levels:
B Use the Test button to move to the next lower menu
•
level.
C Use the Last Page button to move the display to the right
•
to show the menu options/headings at the same level.
When you display the last heading/option available for
the menu item, pressing this button again will wrap
around to show the first heading/option in the list.
An asterisk appears next to your
XEROX 4213 LASER PRINTER USER GUIDE
(The