Task 3. Replacing The Fuser Wick - Xerox 4213 User Manual

Task 3. Replacing the fuser wick

XEROX 4213 LASER PRINTER USER GUIDE
7. Slide the cartridge into the cavity.
seated and it clicks into place.
8. Close the top cover by pushing it down firmly until it latches
into place and is flush with the cover.
This completes the print cartridge replacement procedure.
you will change the fuser wick.
A new fuser wick must be installed every time you change the
print cartridge. The new fuser wick is included in the same box
as the print cartridge.
CARE AND MAINTENANCE
Make sure it is fully
Next
5-49