Control Panel - Xerox 4213 User Manual

Hide thumbs Also See for 4213:
Table of Contents

Advertisement

SUPPLIES: ORDERING INFORMATION
Downloading fonts
Font cartridges
7-2
Notes
Downloaded fonts are not interchangeable between different
emulations.
Downloaded fonts are lost when you switch emulations
through the printer control panel, Mode Change Key (MCK)
commands.
Programmer
commands used to switch emulations.
Downloaded fonts are removed from the memory of the
printer if you switch the printer off. When downloaded fonts
are deleted, the default font is the active font for the printer.
A limited amount of memory is available in the printer. You
need to leave enough memory for printing your jobs. If too
many fonts are downloaded at the same time, the printer
deletes
some
printing.
If after downloading fonts you switch to another emulation
other than LJ2D or XES and print a font status sheet, the
downloaded fonts are not listed on the status sheet.
1. Make sure the correct emulation is selected.
2. Download fonts using the utility supplied with the fonts, or
applications programme.
3. If required, use the printer menus to print a font status sheet
and confirm that fonts are correctly downloaded.
Font cartridges are another way of increasing the number of
typefaces and sizes the printer can output. Font cartridges are
small plug-in modules that contain a range of fonts.
Refer to the Rank Xerox 4213 Laser Printer
Reference
for
information
downloaded
fonts
in
XEROX 4213 LASER PRINTER USER GUIDE
on
the
printer
order
to
continue

Advertisement

Table of Contents
loading

Table of Contents