Accessing The Ibm Twinax Option Configuration At The Ibm Main Menu A3; Setting The Twinax Option As Host Interface - Xerox 4213 User Manual

Accessing the IBM Twinax option configuration at the IBM Main Menu

Setting the Twinax option as host interface

XEROX 4213 LASER PRINTER USER GUIDE
Printer type:
This menu option lets you select the printer types available that
you need to emulate.
PRINTER TYPE
IBM 3812/3816* (IBM 3812/3816, IBM 4245, IBM 5219, IBM
5224, IBM 5225, IBM 5256, IBM 5262, or IBM 6262)
Note: Changes to IBM COMMS options will be automatically
saved as user defaults.
Caution: If you put the 4213 back online at this point, you will
lose all new option settings except those associated with the
IBM COMMS unless you have previously saved them using the
"Saving user defaults" option.
This section shows which buttons on the control panel are used
for accessing the IBM Main Menu, advancing through the menu
items, and if applicable, selecting configuration options. Refer to
"Control panel" section in the "Overview" chapter of this guide
for a diagram showing the location of the control panel buttons.
Make sure that the relevant XES parameters have been correctly
set. Remember that you must use the XES emulation with the
Twinax option.
section.
Use the following buttons at the printer control panel to select
Twinax option as the host interface:
H 1. Press the Online button to take the printer off line.
green online indicator light is not lit.)
A 2. Immediately press and release the Menu button to display
the first Main Menu heading in the top level menu.
display reads:
MAIN MENU
PRINTER LANGUAGE
XEROX COAX/TWINAX OPTION
Refer to "Setting XES parameters for XCTO"
(The
The
A3-65