Auto Continue - Xerox 4213 User Manual

XEROX 4213 LASER PRINTER USER GUIDE
The options in the Output Offset menu are listed below as they
appear in the message display:
OUTPUT OFFSET
DISABLED* (DISABLED or ENABLED)

Auto Continue

The Auto Continue menu item allows you to choose whether the
printer continues printing automatically when a communication
error occurs.
If the Auto Continue option is disabled, the printer pauses and
does not resume printing when an error occurs.
If the Auto Continue option is enabled, the printer logs the
errors and then automatically continues printing.
If the printer is shared by many users, you may not want the
inconvenience of a paused print job.
The Auto Continue menu item options are listed below as they
appear in the message display:
AUTO CONTINUE
DISABLED* (DISABLED or ENABLED)
Host Interface
Through the Host Interface menu, select serial (RS232C) or
parallel (Centronics
communicating with your host computer.
Serial and parallel Centronics
communication parameters.
software manuals for details and make sure your computer and
the 4213 laser printer are using identical settings for each of the
serial and parallel Centronics parameters.
The optional interface
available for the 4213 laser printer.
"Options for the 4213," for more information on this interface
option.
USING THE 4213 MENUS
or DataProducts) interface
communication
Refer to your host computer
connection, Xerox Coax/Twinax,
Refer to appendix A,
when
uses special
is
3-11