Xerox 4213 User Manual page 179

CARE AND MAINTENANCE
5-36
2. Remove any paper jammed in the printer by pulling it gently
upwards and towards the rear of the printer, opposite the
paper flow.
Caution: Avoid touching the shiny, blue surface of the print
cartridge. Damage to the blue surface can cause print defects.
3. Close the top cover by pushing it down firmly until it latches
into place and is flush with the cover.
4. Lift the access handle to lower the left cover.
Note: Be careful when removing the paper from this area
because loose toner can contaminate the fuser.
spots will appear on subsequent prints.
If this happens,
XEROX 4213 LASER PRINTER USER GUIDE