Parameter Setting - Xerox Phaser 6180 Service Manual

Parameter Setting

Phaser 6180 Color Laser Printer Service Manual
This function reads/writes the parameter values, errors, and life counter
values stored in the printer.
Note
Print the parameter list from the
changing the registration value.
To access the Parameter list:
1. Turn the printer power Off (if the printer is On).
2. Simultaneously press the Up Arrow and Down Arrow buttons and turn
on the printer.
3. The Service Mode menu is displayed.
4. Press the Up Arrow or Down Arrow button to find Parameter. Press the
OK button.
5. Select the appropriate item to change (i.e.,
OK button.
6. Enter the appropriate range using the Up Arrow or Down Arrow button.
Press the OK button.
7. The new value "# *" is displayed.
Note
"*" = data has been saved
8. Press the Cancel button to return to the
Shifts the print area in
this direction by reducing
the value.
Slow Scan K to P
Slow Scan 600 M,Y,C
Slow Scan 1200 M,Y,C
Shifts the print area in
this direction by reducing
the value.
Shifts the print area in
this direction by
increasing the value.
Service Mode
Slow Scan
Parameter
Shifts the print area in
this direction by
increasing the value.
Fast Scan K to M,Y,C
Fast Scan 2 K to M,Y,C
Fast Scan Tray 1 (MPT), Tray 2, Tray 3
Fast Scan Duplex
Image Side
Default Value
Adjustments and Calibrations
> Parameter before
KtoP). Press the
menu.
Default
Value
s6180-397
6-7