Character Line Limit - Xerox 4213 User Manual

Problem
Skewed image
Print is slanted.
•
When feeding from the
•
adjustable cassette and
making 2-sided prints one
side do not have the
image correctly located on
the page
XEROX 4213 LASER PRINTER USER GUIDE
Table 6-1. Deterioration
possible solutions (continued)
Check point
Is the paper tray correctly
installed?
Is the paper correctly loaded
in the paper tray? Curl side
up.
Is the paper correctly loaded
in the HCF (curl side down)
Does the loaded paper size
match the menu selection?
Does the cassette type
position of the magnet match
the menu selection?

Character line limit

You may lose text if you exceed 300 characters or character-like
functions (such as backspace or overstrike).
the end of a portrait line or at the beginning of a landscape line.
This applies to full page and partial imaging.
You may either lose data or break the page early if you place
more than 300 graphics, rules, or characters into a very narrow
horizontal band across
determines if the recovery after the page break is complete. This
applies only to partial imaging.
You may also break the page early due to real time imaging
problems if thousands of characters are present on a page. You
can avoid this by not having thousands of small size type (6
point) characters filling a page.
imaging.
TROUBLESHOOTING
in print quality problems
Possible solution
No? Install the
correctly.
No? Correct the paper position in
the paper tray.
No? Correct the paper position in
the HCF.
No? Match the paper size and the
menu selection.
No? Match the type magnet
position and the menu
selection.
This loss occurs at
the page. The page
This applies only to partial
and
paper tray
complexity
6-5