Xerox 4213 User Manual page 241

ADJUSTABLE TRAY
Using the adjustable paper tray
Loading paper in the adjustable tray
A1-2
The optional adjustable tray has two sliding paper guides on the
inside of the tray and a magnetic (type magnet) identifier on the
outside wall of the tray. The tray may be used with ten different
paper sizes.
order to simplify repetitive changes of size, the type magnet on
the tray is used to identify the tray as the A tray or B tray. The A
tray and B tray settings may each be configured to a special
paper size with the menu, enabling you to switch between the
two sizes without using the the menu each time.
Notes There is a clear guide on the pop-up bottom of the
•
adjustable paper tray. Do not remove this guide.
It is strongly recommended you set the correct paper size in
•
the adjustable tray menu and then insert the adjustable tray
while you are still off line. Failure to do so may cause paper
jams and a recurring query on the user interface asking for
paper size.
This section provides information on how to load the paper and
how to position the type magnet before inserting the paper tray.
Notes Although the inactive paper tray may be loaded while the
•
4213 laser printer is printing, removing the active paper tray
can cause a paper jam. Tray 1 cannot be removed while 2-
sided printing is in progress.
The size used is selected via the Main Menu.
XEROX 4213 LASER PRINTER USER GUIDE
In