Handling Special Papers In The Bypass Tray Slot - Xerox 4213 User Manual

Handling special papers in the bypass tray slot

XEROX 4213 LASER PRINTER USER GUIDE
Letterhead and preprinted paper are loaded into the paper
•
tray face down with the top of the preprinted page on the
leading edge of the tray as it is inserted into the tray slot.
Note: The position of self-loading material in the paper trays is
usually the reverse of manually loaded material.
In general, media fed through the bypass tray slot should be
inserted short edge first for optimum performance.
the configuration of your printer, or printer control commands
within your document may require inserting media long edge
first.
The following papers require some special handling when
feeding them through the bypass tray slot:
Predrilled paper is loaded into the feed slot with the holes
•
next to the left side of the tray as it is inserted.
Labels are loaded into the feed slot face up with the top of
•
the labels inserted first into the feed slot.
Letterhead and preprinted
•
bypass tray slot face up with the top of the preprinted page
inserted first into the feed slot.
Nonstandard sized paper (portrait orientation) is fed face
•
up, with the top (short edge) of the paper inserted first.
Envelopes are fed face up.
•
If the envelope flap is on the long edge of the envelope,
—
place the closed fold against the left feed guide.
If the envelope flap is on the short edge of the envelope,
—
place the closed fold against the feed rolls, to be fed in
first.
CARE AND MAINTENANCE
However;
paper are loaded into the
5-9