Reading The Xes Font Status Sheet - Xerox 4213 User Manual

Reading the XES font status sheet

XEROX 4213 LASER PRINTER USER GUIDE
The XES Font Status Sheet lists all the fonts that are currently
loaded and available for use with the emulation:
The font number is assigned by the printer to each font set.
•
A font is selected through the menu by its unique font
number. The numbers 1 through 4 are assigned to the four
resident font sets:
1: Titan10iso-P
2: Titan12iso-P
3: XCP14iso-L
4: XCP125iso-L
The font name identifies the font set. An example of a font
•
name is as follows:
Titan12iso-P: Resident font number 2
Titan
12
iso
-P
Note: Printer commands are case-sensitive.
lower-case letters must be exact.
command when selecting a font.
Additional fonts can be purchased in cartridge or downloadable
form.
Fonts are grouped on the status sheet according to their font
•
source. Fonts are listed in the following order:
—Resident fonts
—Left or Right Cartridge fonts, if present
—Downloaded fonts, if present.
Note: Downloaded fonts are removed from the memory of the
printer if you switch the printer off and when you change
emulations. When downloaded fonts are deleted, the default
font is the active font for the printer.
PRINTING WITH THE 4213
Represents the typeface
Represents the characters per inch
Represents the International
Standards Organisation
encoding scheme)
Represents print orientation (-P=
Portrait, -L=Landscape).
Upper-case and
Enter the entire printer
(ISO
4-9