Using Ibm Coax Utility Menus; Printing A Coax Configuration Sheet - Xerox 4213 User Manual

Using IBM Coax Utility Menus

Printing a Coax configuration sheet

XEROX 4213 LASER PRINTER USER GUIDE
2. Use either of the following buttons to exit the Main Menu:
A Use the Menu button until OFF LINE appears in the
•
message display.
indicator light is not lit.
H Use the Online button.
•
accept-data) and any configuration changes made using
this menu are in effect. The online indicator light is lit.
Notes Care must be taken when exiting to the Main Menu after
•
changing option settings for the IBM Comms menu.
because if you put the 4213 back online, you will lose all
new option settings not associated with the IBM Comms,
unless you have previously saved them using the "Saving user
defaults" option.
Again, you must use the SAVE DEFAULTS option to save any
•
changes made to the printer configuration settings if you
wish these settings to be permanent and active each time the
system is switched on.
switched off and then on again, the configuration returns to
the configuration that was previously saved. Refer to "Saving
User Defaults" section in this guide.
This section shows how to use the IBM utilities and provides
samples of the expected printed outputs.
Use the following buttons at the printer control panel to print a
Coax configuration sheet:
H 1. Press the Online button to take the printer off line.
green online indicator light is not lit.)
XEROX COAX/TWINAX OPTION
The printer is off line.
The printer is online (ready-to-
Otherwise, when your system is
The online
This is
(The
A3-43