Xerox 4213 User Manual page 398

4213 LASER PRINTER USER GUIDE
SIMM KIT INSTALLATION AND REMOVAL INSTRUCTIONS
6. Press out on the locking tabs to release the SIMM board.
7. Allow the board to rotate backward to a 30° angle, and
remove it from the slot (refer to figure A5-11).
Figure A5-11. Rotating SIMM board to a 30° angle for
removal
SIMM board in J11 rotated to 30° angle
8. To remove the remaining SIMM boards, repeat steps 2 to 4.
Note: Remove only the SIMM boards that are obstructing
the replacement of the faulty SIMM board.
9. Once all the obstructing SIMM boards are removed, replace
the faulty board(s) with the new board(s).
Note: Refer to the installation procedures for instructions on
installing SIMM boards.
A5-11