Cleaning The Printer - Xerox 4213 User Manual

CARE AND MAINTENANCE

Cleaning the printer

5-64
3. Close the top cover by pushing it down until it latches into
place and is flush with the cover.
When the printer exterior becomes dirty, clean it, and keep the
following points in mind:
WARNING: The power to the printer should be off before
cleaning the printer.
position.
Use a soft dry cloth to remove dust and dirt on the outer
•
surface of the printer.
cloth, clean it with a cloth slightly moistened with water.
Ensure the cloth is not dripping wet.
Be careful not to get water inside the printer.
•
Never use alcohol or thinner.
•
The power switch should be in the "O"
If dirt is hard to wipe off with a dry
XEROX 4213 LASER PRINTER USER GUIDE