Xerox 4213 User Manual page 141

PRINTING WITH THE 4213
4-32
3. Insert the envelope until it meets resistance.
envelope straight (aligned and flush with the left feed guide)
to avoid a skewed print.
paper until it moves, then release it. The paper or envelope
is automatically drawn into the printer when it is ready to
print.
If your envelope print job is completed, continue with step 6.
Feeding multiple envelopes through the bypass slot
Follow these instructions when feeding subsequent envelopes
through the bypass slot:
4. Watch for the add paper message and listen for the chime.
The message and chime tone indicate that the printer is
ready to accept the next envelope.
Note: The previous envelope should have fallen into the output
tray.
5. Align and insert the next envelope properly.
pressure on the sheet or envelope until it moves and then
release it.
Continue with steps 4 and 5 until you complete the envelope
print job.
Note: You should not print envelopes on two sides.
print all envelopes in landscape orientation to format envelopes
correctly.
Maintain pressure against the
XEROX 4213 LASER PRINTER USER GUIDE
Keep the
Maintain
You must