Print A Configuration Sheet - Xerox 4213 User Manual

INSTALLATION

Print a configuration sheet

1-20
6. Place the filled paper tray all the way into the empty tray
slot. Make sure the end of the paper tray with the snubbers
go in first.
place.
Note: Make sure that the paper tray is correctly seated.
When the paper tray is not completely and correctly
inserted, the configuration sheet may display an incorrect
tray code which can cause a problem in your print job.
The yellow Warning indicator light is no longer lit after the paper
trays are installed. The message display shows that the printer is
online and ready to accept data sent from your computer.
green online indicator light is lit.
(XES) printer command is the default printer emulation at power
up.
Note: Refer to the "Using the 4213 Menus" chapter if your
applications require a different default printer emulation.
To review the configuration settings in place for the printer and
the XES emulation, you should print a Configuration Sheet.
To print the Configuration Sheet, press and release the following
buttons in the sequence shown:
H 1. Online takes the printer off line (the green online indicator
light is not lit).
B
2. Test accesses the Test Menu.
D 3. Select prints the Configuration Sheet.
H 4. Online puts the printer back online (the green online
indicator light is lit).
Push it gently into position until it clicks into
The Xerox Escape Sequences
XEROX 4213 LASER PRINTER USER GUIDE
The