Using Ibm Twinax Utility Menus; Printing A Twinax Configuration Sheet A3-69 - Xerox 4213 User Manual

Using IBM Twinax Utility Menus

Printing a Twinax configuration sheet
XEROX 4213 LASER PRINTER USER GUIDE
This section shows how to use the IBM utilities and provides
samples of the expected printed outputs.
Follow these steps to print a Twinax configuration sheet:
H Press the Online button to take the printer off line.
online indicator light is not lit.) Next press and release the Menu
A button to display MAIN MENU/PRINTER LANGUAGE.
display reads IBM MAIN MENU/IBM BUTTONS, skip the next four
steps.)
C Press the Last Page button until the display reads MAIN
MENU/HOST INTERFACE.
display the interface headings available. The display reads HOST
INTERFACE/IBM COAX/TWINAX*. Next press the Select D button
to select the option Coax/Twinax.
Press the Test B button th display IMB MAIN MENU/IBM
BUTTONS. Now press the Last Page C button until the display
reads IBM MAIN MENU/IBM UTILITIES. Press the Test B button
again to display IBM UTILITIES/PRINT CONFIG. Press the Test B
button again and the display reads PRINT CONFIG/ENABLED.
Next press the Select D button to enable printing of the
configuration sheet.
printer back online.
Twinax configuration sheet will be printed, as shown in figure 3A-
20.
XEROX COAX/TWINAX OPTION
Now press the Test B button to
Last, press the Online H button to put the
(The green online indicator light is lit.)
(The green
(If the
A
A3-69