Emulation - Xerox 4213 User Manual

USING THE 4213 MENUS
3-8

Emulation

The Emulation menu item selects which emulation is to be used
as the current emulation. Selecting a new emulation here effects
an immediate switch to the chosen emulation.
You must save your selection at the Reset Menu if you want to
keep the current default emulation in effect at the time you
switch on the 4213 laser printer.
The Emulation menu item options are listed below as they appear
in the message display:
EMULATION
XES* (XES, LJ2D or "Option")
Notes Any additional emulations installed through a board appear as
•
option selections on the menu.
Each of the printer emulations can be configured to meet
•
specific printing needs and system requirements.
are made through the emulation submenu.
defaults you set at the menu are in effect each time the
selected emulation is used.
discussed in the section "Emulation configuration" later in
this chapter.
Adjustable Paper Size
The Adjustable Paper Size menu item allows you to identify the
paper size being fed through the manual bypass slot or placed in
the optional adjustable paper tray. Appendix A, "Options for the
4213," contains more information on setting the paper size for
the optional adjustable tray.
The options in the Adjustable Paper Size menu are listed below
as they appear in the message display:
ADJ. PAPER SIZE
ADJUSTABLE A, ADJUSTABLE B or BYPASS
The emulation
Emulation configurations are
XEROX 4213 LASER PRINTER USER GUIDE
Changes