Setting Line Ending Parameter; Setting Language Parameter - Xerox 4213 User Manual
Hide thumbs
Also See for 4213:
- Programmer's reference manual (246 pages) ,
- User manual (8 pages) ,
- Quick reference card (6 pages)
Table of Contents
Advertisement
XEROX COAX/TWINAX OPTION
Setting line ending parameter
Setting language parameter
A3-24
D
15. Press the Select button to select the desired encoding.
asterisk appears next to your selection.
A
16. Press and release the Menu button to re-display the XES
emulation menu options again, the display reads:
XES
DATA ENCODING
C
17. Press the Last Page button until the display reads:
XES
LINE ENDING
B
18. Press the Test button to display the currently selected line
ending option. The display reads:
LINE ENDING
NONE
*
C
If the display does not read as indicated in procedural step
number 18, press the Last Page button until the display
reads:
LINE ENDING
NONE
D
19. Press the Select button to select line ending option.
asterisk appears next to your selection.
A
20. Press and release the Menu button to re-display the XES
emulation menu options again, the display reads:
XES
LINE ENDING
If data encoding is set to EBCDIC-SNA mode, continue with step
21.
Otherwise, if data encoding is set to ISO6937 or EBCDIC-
DSC modes, jump to step 25 and continue:
C
21. Press the Last Page button until the display reads:
XES
LANGUAGE
XEROX 4213 LASER PRINTER USER GUIDE
An
An
Advertisement
Chapters
Table of Contents
