Connect The Printer To The Host - Xerox 4213 User Manual

Connect the printer to the host

XEROX 4213 LASER PRINTER USER GUIDE
12. Close the top cover by pushing it down firmly until it latches
into place and is flush with the cover.
The 4213 laser printer is configured for parallel interface when it
is shipped.
Note: If you want to change the printer configuration to serial
interface, refer to the "Main Menu," section in the "Using the
4213 Menus" chapter.
1. Connect a computer interface cable (purchased separately)
to the appropriate connector, either serial (RS232C) or
parallel (Centronics) on your computer.
end of the cable to the appropriate serial or parallel
connector on the printer.
INSTALLATION
Attach the other
1-15