USING THE 4213 MENUS
Emulation settings for LJ2D
LJ2D emulation items
3-36
To reset the emulation configuration back to the previously saved
default settings, access the Reset Menu and use the following
buttons:
H
1. Press the Online button to take the printer off line.
green online indicator light is not lit.)
G
2. Press the Reset button to access the Reset Menu.
display reads:
RESET MENU
EMULATION RESET
D
3. Press the Select button to reset the emulation configuration
to the previously saved defaults.
H
4. Press the Online button to put the printer back online. (The
green online indicator light is lit.)
The following items in the LJ2D emulation menu may be set
permanently or temporarily:
Number of copies
•
Tray sequence mode
•
2-Sided print mode
•
Font number selection
•
Paper size
•
Page orientation
•
Form length (lines per vertical inch)
•
Symbol set.
•
Note: Emulation Reset on the 4213 and the HPIID are the same,
with one exception.
the buffer when it resets itself. The 4213 adds a Form Feed and
prints any remaining text or data.
The following section describes the LJ2D emulation menu items
and their corresponding options.
The HPIID deletes any text or data still in
XEROX 4213 LASER PRINTER USER GUIDE
(The
The