Termination switch position
XEROX 4213 LASER PRINTER USER GUIDE
18. The termination switch is found on the front plate of the
Coax/Twinax board. Refer to figure A3-11. Put it in one of
the following positions:
Up
-
Terminate line
•
Down -
Non-terminate line
•
Note:
If you are working in the Coax environment, it is
recommended that you leave the termination switch in the up (or
terminate line) position.
Figure A3-11.
Termination switch position
The termination switch should be in the up position if there are
no other Twinax devices to be connected after it.
XEROX COAX/TWINAX OPTION
A3-17