Xerox 4213 User Manual page 215

TROUBLESHOOTING
Problem
Repeated jams after clearing
a paper jam.
Repeated jams occur when
the adjustable cassette is
installed.
6-8
Table 6-2. Paper transport problems and solutions
(continued)
Check point
If one of the following jam
codes recurs:
0820, 0821,
0822, 0823 (HCF),
1020, 1021,
1022, 1023,
1024
Have you removed all prints
from the top cover output
tray?
Did one of the following jam
codes recur:
0821, 0822, 0831,
0832, 1021, 1022,
1026
Is the adjustable cassette in
the tray 1 position?
Are the paper guides of the
cassette against the
stack?
Does the loaded paper size
match the menu selection?
Does the cassette
magnet's position match the
menu selection?
Possible solution
Yes? Check and clear all paper
under the following areas:
Top cover of the printer
•
Refeed baffle.
•
Also make sure the refeed baffle is
lowered, and seated correctly.
the HCF elevator door completely.
No? Clear all jammed paper. DO
NOT put
from output tray back into
tray.
Yes? Remove
check for paper clips and/or
staples attached to the small
square brown
the side of the trays.
Yes? Move the adjustable cassette
to the tray 2 position.
No? Correctly position the guides
paper against the stack.
No? Match the paper size and the
menu selection.
type No? Match
position
selection.
XEROX 4213 LASER PRINTER USER GUIDE
Close
prints removed
paper trays and
magnets on
the type magnet
and the menu