Printing The Currently Selected Translate Tables A3-71 - Xerox 4213 User Manual

Printing the currently selected translate tables
XEROX 4213 LASER PRINTER USER GUIDE
4. Font information
Identification (GFID) numbers relate to Xerox font names.
The default font selected by the GFID algorithm is bolded.
Review the information listed on the configuration sheet to
determine if the current settings are satisfactory.
Notes The font information does not tell you what fonts are
•
available in the 4213 itself.
To check the fonts available in the 4213 you will need to
•
print an XES Font Status Sheet.
The language option on the configuration sheet will be
•
shown also as "N/A" (not applicable) when the XCTO is
operating in its EBCDIC mode.
Follow steps for "Printing a Twinax configuration sheet" until the
display reads IBM UTILITIES/PRINT CONFIG, Now press the Last
Page C button and the display reads IBM UTILITIES/PRINT TABLE.
Next press the Test B button and PRINT TABLE/DISABLES*
displays. Press
TABLE/ENABLED displays.
printing of the translate tables. Press the Online H button to put
the printer back online and the currently selected tables will be
printed. Figures A3-21 to A3-23 shows sample Twinax Translate
Tables.
XEROX COAX/TWINAX OPTION
shows how the
the Last Page button
C
Press the Select D button to enable
IBM Global Font
and PRINT
A3-71