Cautions For Maintenance And Inspection - Xerox 4213 User Manual

Cautions for maintenance and inspection

Cautions for the power cord
Space requirements
Printer dimensions
XEROX 4213 LASER PRINTER USER GUIDE
For your personal safety, you should always keep the following
cautions and directions in mind when you perform normal printer
maintenance:
There are high voltage areas and high temperature areas
•
inside the printer.
See chapter 5, "Care and maintenance," for paper jam
•
clearance, maintenance and inspection of the printer, and
replacement of consumable supplies.
Do not perform any operation other than those stated in this
•
manual. Any modification to the printer can cause a
malfunction or damage.
For your personal safety, you should always keep in mind the
following cautions and directions when handling the power cord:
Before you plug in or unplug the cord, turn off the printer
•
power.
To plug in or unplug the cord, hold the plug instead of the
•
cord.
WARNING: Do not touch the plug, connector, or cord with
wet hands.
Periodically check that the following situations are stable:
•
— The power cord is plugged firmly into the AC outlet and
the AC inlet on the printer.
— The power cord generates no abnormal heat.
— The power cord has no worn places.
Allow enough open space around the printer to make operation,
supply replacement, and maintenance possible.
Printer dimensions with paper trays:
Height: 48.45 cm (19.5 inches)
Width: 52 cm (20.8 inches)
Depth: 49.25 cm (19.7 inches).
INSTALLATION
1-3