Xerox 4213 User Manual page 394

4213 LASER PRINTER USER GUIDE
SIMM KIT INSTALLATION AND REMOVAL INSTRUCTIONS
11. Check to make sure the SIMM board is securely held by the
locking tabs.
If the board tilts easily back to the 30° angle, repeat
•
steps 2 to 5.
If the board does not move, continue with step 12.
•
12. To install remaining boards, repeat steps 7 to 11.
Note: Install one board at a time, beginning with J15, and
work in descending order until all the SIMM boards are
installed. Figure A5-7 shows 5 SIMM boards in place.
Figure A5-7. System controller board with 5 SIMM boards in
place
5 SIMM boards installed in J15-J11
A5-7