Ibm Error Codes - Xerox 4213 User Manual

XEROX COAX/TWINAX OPTION

IBM error codes

Number Message
1410 IBM Type 1 error
1411 IBM Type 2 error
1412 IBM Type 3 error
1413 IBM Type 4 error
1414 IBM graphic character error
1415 IBM Invalid SCS parameter error An out of range control code parameter has been detected
1416 IBM invalid SCS command error A data stream command has been received in SCS mode
1417 IBM invalid character set ID
error
1418 IBM function not supported.
A3-82
This section describes the error codes which will be reported by
the 4213 laser printer to the error logging system.
Table A3-3. IBM Error Codes
Meaning/action
A condition has occurred that may cause loss of text
information.
A condition has occurred that may cause a change in the
intended appearance or presented information but does not
affect the interpretation of text or cause presentation space
overruns.
A data stream command has been received with an
unsupported control class or type code.
loss of text or
information.
An out of range control code parameter has been detected.
This may result in loss of text and or change in appearance
of presented information.
An unsupported graphic character code has been detected.
This may result in a change in appearance of presented
information.
in SCS mode. This may result in loss of text and/or change
in appearance of presented information.
with an unsupported control class or type code.
result in loss of text and/or change in appearance of
presented information.
An invalid character set has been requested.
An IBM command has been received which is not supported
by the selected printer type.
This may result in
change in appearance
XEROX 4213 LASER PRINTER USER GUIDE
of presented
This may