Changing The Xes Emulation Configuration At The Main Menu - Xerox 4213 User Manual

Emulation configuration

Changing the XES emulation configuration at the Main Menu

XEROX 4213 LASER PRINTER USER GUIDE
The 4213 laser printer emulates the Xerox Escape Sequence
mode and the HP Laserjet series IID (LJ2D) printers.
emulations are available for the 4213 laser printer.
appendix A,
configuring the optional emulations.
The emulation submenus allow you to change options in each
emulation.
There are two types of emulation configuration changes which
can be done:
Permanent settings remain unchanged even through a power
•
off/on cycle.
Temporary
•
changed at this submenu, a software command is received,
or the printer is switched off.
Notes Any additional
•
emulations at the Main Menu.
The options you select as defaults apply to the selected
•
emulation only. To change the options for an emulation, first
display the emulation heading at the Main Menu, step
through the options and select the options you want as the
defaults for the emulation.
configuration at the Reset Menu.
Each printer is shipped with factory default emulation
•
configurations.
configurations in place when you receive your printer.
have the choice, however, to set your own user defaults in
order to configure each emulation to operate within your
unique office environment.
commands to the printer for you, you can leave the
emulation settings at their factory defaults.
overrides the menu configurations you set.
The submenus in the emulation list configuration options for the
resident emulations.
selected through the Main Menu and then set up individually to
conform to your printing needs.
"Options for the 4213,"
settings remain current
emulations installed
Then save the emulation
Factory defaults refer to the emulation
If your software sends MCK
All of the printer emulations may be
USING THE 4213 MENUS
Optional
Refer to
for information on
until the setting is
appear as option
You
Your software
3-19