Dsc Configuration A3-34 - Xerox 4213 User Manual

XEROX COAX/TWINAX OPTION
A3-34
High Capacity Feeder orientation:
This menu option lets you define the default page orientation for
the high capacity feeder orientation.
HCF TRAY ORIENT
COR* (COR, PORTRAIT, or LANDSCAPE)
Note: This option is not available when the 4045 model 20
printer emulation is selected.
DSC Configuration
The DSC menu options allow you to configure your printer for
DSC operation.
Note: For more details of the DSC configuration options, refer
to "DSC-DSE options" section in the "Special Features" chapter
of the Xerox Coax/Twinax (XCTO) Reference Manual.
Form Feed before local copy:
This menu option determines the print position before an
Operator Initiated Local Copy (print screen function).
option is disabled, no Form Feed occurs.
enabled, the printer performs an automatic
Form Feed was the last command).
position 1 of the first line on the next page.
FF BEFORE LOCAL COPY
DISABLED* (DISABLED or ENABLED)
Form Feed after local copy:
This menu option determines the print position after an Operator
Initiated Local Copy (print screen function).
enabled, the printer performs an automatic Form Feed unless a
Form Feed was the last command.
position 1 of the first line on the next page.
disabled, the printer defaults to Form Feed at the end of the
print buffer setting.
FF AFTER LOCAL COPY
ENABLED* (ENABLED or DISABLED)
Note: It is recommended that this option remains enabled for
the 4045 model 20 emulation.
If this option is
Form Feed (unless a
The new print position is
If this option is
The new print position is
If this option is
XEROX 4213 LASER PRINTER USER GUIDE
If this