Changing The Emulation From Xes To Postscript - Xerox 4213 User Manual

A. Changing the emulation from XES to PostScript
Press the Online button to take the printer off line.
H
A Press the Menu button to access the Main Menu.
Press the Last Page button until the display reads EMULATION.
C
B Press the Test button to display the available emulation headings. The display reads XES*.
Press the Last Page button until the display reads POSTSCRIPT.
C
Press the Select button to select POSTSCRIPT as the current emulation.
D
next to your selection.
Press the Online button to put the printer back online. POSTSCRIPT* is the current emulation,
H
in place until a command to change emulations is received, the emulation is changed using
this menu, the printer is reset, or the printer is switched off.
To save POSTSCRIPT as the default emulation:
Press the Online button to take the printer off line.
H
Press the Reset button to access the Reset Menu. The display reads EMULATION RESET.
G
Press the Last Page button until the display reads SAVE DEFAULTS.
C
Press the Select button to select the option.
D
Press the Online button to put the printer back online.
H
To reset XES as the default emulation:
Press the Online button to take the printer off line.
H
Press the Reset button to access the Reset Menu. The display reads EMULATION RESET.
G
Go back into the menu and select XES.
Press the Select button to select the option.
D
Press the Online button to put the printer back online.
H
XEROX 4213 LASER PRINTER USER GUIDE
This example shows you how to change the current printer
emulation from the default, XES, to POSTSCRIPT.
POSTSCRIPT EMULATION
An asterisk appears
A4-25