Xerox 4213 User Manual page 187

CARE AND MAINTENANCE
5-44
4. Close the top cover by pushing it down until it latches into
place.
5. Remove the cotton swab from the corotron cleaning kit.
6. Use the cotton swab to gently clean the corotron wire.
Make one or two passes with the swab over the wire,
moving around the diagonally wrapped wires as you
proceed along the corotron wire.
is recessed slightly, runs parallel to the length of the
corotron assembly.
Caution: Be careful not to break the corotron wire.
leave cotton fragments on the wire.
This slender wire, which
XEROX 4213 LASER PRINTER USER GUIDE
Do not