Coax Versus Twinax - Xerox 4213 User Manual

Coax versus Twinax

XEROX 4213 LASER PRINTER USER GUIDE
B 22. Press the Test button to display the currently selected
language option. The display reads:
LANGUAGE
US ENGLISH
If the display does not read the required language, press the Last
Page button until it does.
Note: Refer to the Main Menu map for the XES language options
available to you.
D 23. Press the Select button to select the language.
appears next to your selection.
A 24. Press and release the Menu button to display the XES
emulation menu option. The display reads:
XES
LANGUAGE
A 25. Press and release the Menu button to display the emulation
option. The display reads:
EMULATION
XES
A 26. Press and release the Menu button to display the Main Menu
option. The display reads:
MAIN MENU
EMULATION
H 27. Press the Online button to place the printer online.
online indicator light is lit.
Note: At this point it may be wise to use the SAVE DEFAULTS
option to save any changes made to the printer configuration
settings. By doing this, when your system is switched off and
then on again, the configuration returns to that which you had
previously saved. Refer to "Saving User Defaults" section in this
guide.
If the 4213 is used in the Coax environment, refer to "Using the
IBM Coax interface" section.
Refer to "Using the IBM Twinax interface" section if the 4213 is
used in the Twinax environment.
XEROX COAX/TWINAX OPTION
An asterisk
The
A3-25