A. Changing The Current Emulation From Xes To Lj2D - Xerox 4213 User Manual

A. Changing the current emulation from XES to LJ2D

Press the Online button to take the printer off line.
H
Press the Menu button to access the Main Menu.
A
Press the Last Page button until the display reads EMULATION.
C
Press the Test button to display the available emulation headings. The display reads XES*.
B
Press the Last Page button until the display reads LJ2D.
C
Press the Select button to select LJ2D as the current emulation.
D
your selection.
Press the Online button to put the printer back online.
H
place until a command to change emulations is received, the emulation is changed using this
menu, the printer is reset, or the printer is switched off.
To reset XES as the current emulation:
Press the Online button to take the printer off line.
H
Press the Reset button to access the Reset Menu. The display reads EMULATION RESET.
G
Press the Last Page button until the display reads RECALL USER DFT..
C
Press the Select button to select the option.
D
Press the Online button to put the printer back online.
H
XEROX 4213 LASER PRINTER USER GUIDE
This example shows how to change the current printer emulation
from the default XES to LJ2D.
USING THE 4213 MENUS
An asterisk appears next to
LJ2D* is the current emulation, in
3-45