Line Ending - Xerox 4213 User Manual

XEROX 4213 LASER PRINTER USER GUIDE
The options in the Data Encoding menu are listed below as they
appear on the message display:
DATA ENCODING
ASCII* (ISO 6937, ASCII, EBCDIC-SNA, EBCDIC-DSC or IBM
PC)

Line Ending

The Line Ending menu item, if enabled, does the following:
AUTO CR - automatically adds a carriage return (CR)
•
character when it receives a line feed (LF) character.
Check the user manual for your host computer or application
software to see if a carriage return is sent automatically at the
end of each line.
Note: If the characters are being printed on top of one another
at the far right of the page, your host computer is probably not
sending an automatic carriage return.
CR and the printer will insert a carriage return.
AUTO LF - automatically adds a line feed (LF) character when
•
it receives a carriage return (CR) character.
Check the user manual for your application software to see if
a line feed is sent automatically at the end of each line.
Note: If lines are being printed on top of one another, your
host computer is probably not sending automatic line feeds.
this case, select AUTO LF and the printer will insert a line feed.
The Line Ending menu item options are listed below as they
appear on the message display:
LINE ENDING
NONE* (AUTO CR, AUTO LF or NONE)
Font Rotation
The Font Rotation menu item rotates a font 90 degrees. This
feature changes the orientation of a downloaded font from
portrait to landscape or landscape to portrait.
downloadable fonts in 2700 II format).
USING THE 4213 MENUS
In this case, select AUTO
(This is useful for
3-27
In